Car Auto Motorcycle Battery Charger Float Trickle Tender Maintainer 6V/12V

Description

Product description
The InThoor trickle charger is ideal for charging both 6V and 12V Vehicle, motorcycle, Lawn Mower, ATV, RV and More. 4-stage charging process reduces the risk of damaging the battery.
4-stage charging process
Stage 1: initialization, when the charger power on then it start self-check and detect the battery correct connect. low output voltage without battery Fault LED is light, please CHECK THE POLARITY IS CORRECT.
Stage 2: Bulk charge, using the charger highest rated current for the type of battery in use until it reaches 80% capacity( LEDs 50% blinking, 100% OFF)
Stage 3: Absorption, the output voltage is limited to 7.3V(6V battery) or 14.5V(12V battery) while current declines as the battery charges to its full capacity without overheating( LEDs 50% ON ,100% blinking)
Stage 4: Float, at this stage, the battery is fully charged and the charger maintains the battery through pulse charging( LEDs 50% ON ,100% ON)
SPECIFICATION
Input: 100-240V AC@50/60Hz 0.5rms
Output: DC 6.9V@ 1.5Amp/ DC [email protected]
Limited voltage: 7.2~7.3V or 14.5~14.7V
Float current: 300mA~400mA
Charging mode: Fully automatic
Suitable battery: 6V or 12V AGM GEL VRLA SLA WET
Charging Battery: 6-12Ah
Maintaining Battery: 4-36Ah
Safety: EN60950-1 EN60335
EMC: EN55022
Approved: CE RoHS
Package includes:
1 x InThoor Battery Charger & Maintainer
1 x DC Output Cable with Clip Connectors
1 x DC Output Cable with Ring Connectors
1 x Instruction Manual
CONNECTION PRECAUTIONS
Connect and disconnect DC output clips only after setting the charger switches to off position and removing AC cord from the electric outlet. Never allow clips to touch each other.
1.Follow these steps when battery Is Installed In a vehicle.
A spark near battery may cause a battery explosion. To reduce risk of a spark near battery
a. Position AC and DC cords to reduce risk of damage byhood, door or any moving engine part
b. Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons
c. Check polarity of battery posts. A positive(p os,+)battery post may have a larger diameter than a negativelneg.) post
d.Determine which post of battery is grounded (connected) to the chassis. If negative post is grounded to the chassis (as in most vehicles),see item(e).If positive post is grounded to the chassis, see item(f)
e. For a negative-grounded vehicle, connect the positive (red) clip from the battery charger to the positivelp o s, +lpost of battery first.Connect the negative(black) clip