Automatic Battery Charger Motorcycle Trickle Float Tender Maintainer 12V 800mA

Description

Automatic Battery Charger Motorcycle Trickle Float Tender Maintainer 12V 800mA
➻❥
It can charge all types of 12V lead-acid batteries, including flooded or sealed maintenance free batteries (AGM & gel cell). It's the best smart charger for automotive, motorcycle, marine, RV, Powersport, lawn&garden, children toys, etc.
➻❥
No need of any manual operation, just plug and leave it for charging and maintaining your batteries automatically for long time. The microprocessor controlled program will monitor the whole charging progress and automatically stop when the battery is fully charged. Then it will monitor the battery voltage and maintain the battery with a float charging current. Zero output ( 0 Volt on DC port ) in standby mode without connecting with the battery to save energy.
➻❥
Micro-processor Controlled program. No worry about overcharge, short circuit and reverse polarity. Spark-free technology applied. Featured Constant Pulse Current Maintenance function helps the battery avoid excessive charge and discharge. It will extend the battery life and recover batteries more effectively.
➻❥
With SAE quick release connection options: Ring Terminals (7.5amp fused for safety protection) or Alligator Clips. With the ring terminal harness connecting with the battery permanently, it's so easy to connect the charger by the SAE adapters when needed. Fuse protection will avoid danger of short circuit or overload.
➻❥
Energy Saving design with one LED indicator to display different charging status. Certified by CE, RoHS, UL and CEC. Conform to the CEC (​CALIFORNIA ENERGY COMMISSION)
MCU Controlled Program
➻❥
Intelligent IC chip with smart charging program
Sparkproof
➻❥
Only give power with correct connection with batteies
Multi-level Safety
➻❥
Protects against Overcharging, Short-circuits and Reverse polarity.
Power Saving
➻❥
ZERO battery draw. No output without load. One LED indicator.
Quick Disconnect Harness
➻❥
Connect and disconnect the charger with the battery easily
Automatic Charging Maintaining
➻❥
Fully Automatic charging & maintaining. Connect and leave it.
Reversed Hook-Up Protection
➻❥
Checks for a correct connection before giving power.
International standard
➻❥
ETL(UL regulations) listed, BC standard, CE and RoHS certified.
The MOTOPOWER MP00205A 12V 800mA Battery Charger allows you to connect the charger to the battery and leave it for maintenance indefinitely.
Once the battery has reached a 100% charge, the chargers will automatically switch it's output voltage to a safe, storage/float level (13.6V+/-0.2V) that eliminates the need to worry about the damaging effects of overcharging.
Pulse Current Recovery Mode:
In the Absorption Mode, the charger will give a 0.5Amp pulse current to charge and recover the battery until it's fully charged. In this stage, the charger will decrease the battery sulfation and improve the battery performance gradually. For several times charging, you will find the battery internal resistance is lower and the performance is improved.
Technical Details:
➻❥
Input Voltage: 100-240V AC / 60Hz. - Output Voltage: 12 Volts DC @ 800mA - Charged Voltage: 14.2+/-0.2 Volts
➻❥
Maintenance Voltage: 13.6+/-0.2 Volts - Activate Voltage: 4Volts ( Do not suggest charging dead batteries )
Package Includes:
➻❥
Battery Charger x 1 - SAE Alligator Clamp Cable x 1 - SAE Eyelet Terminal Cable(7.5A fused) x 1 - Instruction Manual x 1